With three vibrant
fluorescent colors - red, green, and yellow, you can be better seen
on the race couse. We show our standard graphics below on DNs, but
can create and fit graphics for any ice boat class - Skeeter, Nite,
Renegate, Ice Opti, Gambit, and more.
NEW! - High-viz
Plank End Graphics
Inspired by the
port and starboard lights on fighter jets, we engineered these high-visibility
flourescent graphics to fit on the end of the DN ice boat plank. The
port size is brilliant fluorescent red, and the starboard side is
fluorescent green, seen below. Unlike the hull safety stripes, the
fluorescent plank end panels can be seen 360°. No matter what
your point of sail, your competitors will know immediately whether
you're on port or starboard, giving you each more time to keep clear
and avoid a high-speed collision. We can scale these up to fit any
other iceboat class, or make adjustments - like adding a panel for
the top of your runner.
$30
- SALE - FREE SHIPPING (U.S. only)
Hull
Safety Stripes
Long
- Complies with IDNIYRA Proposal 10, which didn't pass but received a large
number of votes. The fluorescent green stripe is applied to the
starboard side and the fluorescent red stripe is applied to the
port side. Four Styles are available: Regular is about
40"; Tiger Teeth is 43"; Fade is 43"
and Race Flag is 46". These stripes are designed for
Goodwin-plan boats , but you can trim them for almost any hull with
an X-acto knife or razor blade.
$40
for Regular, $45 for Tiger Teeth, Fade, and Race Flags
- SALE - FREE SHIPPING (U.S. only)

Medium - These stripes don't meet Proposal 10,
but greatly increase visibility. The fluorescent green stripe is
applied to the starboard side and the fluorescent red stripe is
applied to the port side.
$30
for Regular, $35 for Tiger Teeth, Fade, and Race Flags
Short
- The Regular style is about 12" long, the
others range from 16" to 28".
$20
for Regular, $25 for Tiger Teeth, Fade, and Race Flags
Hull Panel
Safety Graphics - Any of the graphics on our DN
Hull Graphics page can be selected in a flourescent red (port)
and green (starboard) combination for extra safety.

Mast
Stripes
Mast
Tip stripes - Add visibility with fluorescent red and green
stripes for the tip of your mast. These stripes are 36" long.
Mast
Base stripes - Apply these to the sides of your mast near
the base to give great visibility to other sailors. These fluorescent
red and green stripes extend from the base to the just below the
boom jaws and include a cut-out area for the tack/boom jaws and
halyard fairlead.
Boom
Stripes

Boom
stripes - The wide flat sections of Forstner extrusions,
wood booms, and even the curved sections of other extrusions are
a great place for adding high-visibility fluorescent stripes for
port and starboard.
The "short"
boom stripes are approximately 1.75" tall and 24" long.
Apply them in all one section or cut them into sections to apply
part to the fore and aft sections of the boom. Just $10 for the
set.
The "long"
stripes measure 1.75" x 96" and are delivered in two sections
- long enough for the entire boom. $25 per set.